BackpackGearTest
  Guest - Not logged in 

Reviews > Electronic Devices > Watches > Freestyle Nomad Watch > Test Report by Tom Callahan

FREESTYLE NOMAD WATCH
TEST SERIES BY TOM CALLAHAN - Oct 29, 2008 to March 11, 2009
LONG-TERM REPORT
March 11, 2009

CLICK HERE TO SKIP TO THE FIELD REPORT
CLICK HERE TO SKIP TO THE LONG-TERM REPORT

TESTER INFORMATION

NAME: Tom Callahan
EMAIL: tcallahanbgt AT yahoo DOT com
AGE: 50
LOCATION: Seattle, Washington, USA
GENDER: M
HEIGHT: 5' 11" (1.80 m)
WEIGHT: 170 lb (77.10 kg)

For the past 20 years I have lived off and on in Washington State, backpacking in the Cascade Mountains. I get out regularly on day hikes and multi-day trips and usually try to include a good off trail scramble. During the winter I get out snowshoeing at every opportunity. I also enjoy glacier climbing, summiting prominent peaks like Mt. Rainier (14K ft/4K m) and Mt. Baker (10K ft/3K m). My pack weight will range from 15 - 50 lbs (7 - 23 kg) depending on the season and the length and type of trip.


INITIAL REPORT

PRODUCT INFORMATION & SPECIFICATIONS

Manufacturer: Freestyle
Year of Manufacture: 2008
Manufacturer's Website: http://www.freestyleusa.com/
MSRP: US$ 160.00
Listed Weight: N/A
Measured Weight: 2.8 oz (79 g)

INITIAL IMPRESSIONS

Nomad Watch
Nomad Watch


The Freestyle Nomad is a multi-function watch with 8 modes:
- Time & Date
- Compass
- Altimeter
- Barometer
- Chronometer
- Timer
- Alarm
- Temperature

The Nomad watch arrived in its retail box. Taking the lid off revealed the watch mounted on a display stand. Inside the stand were the directions and instructions for the care of the watch. The watch had a product tag listing the major features plus a Freestyle hang tag.

Taking the watch off the stand I was impressed with the nice feel of it. The watch felt sturdy with a good weight but not overly heavy. The body of the watch is stainless steel with 4 black rubber control buttons, 2 on each side. The watch body is roughly circular in shape with a diameter of 2 in (5 cm) and a thickness of 0.5 in (1.3 cm). The face of the watch is also roughly circular with a diameter of 1.4 in (3 cm). The face of the watch is surrounded by hard rubber. This rubber comes in white, black and yellow. I requested yellow which is what I received. The watch face is slightly recessed, below the yellow rubber.

The watch band is gray rubber that is soft and flexible, also with a sturdy feel to it. The band tapers from the watch body to a width of 1.8 in (2.2 cm). The total length of the watch and band is 10 in (25.5 cm). The watch band is secure by means of a metal buckle.

The back of the watch body described the watch's water resistance as "30 METERS H2O" (100 ft). In the instruction sheet the water resistance was also noted as "30 meters H2O" (100 ft). This water resistance rating of 30 m (100 ft) was different than the product info on the Freestyle web site. The web site listed the water resistance as "100 meters" (330 ft) for the Nomad. I emailed Freestyle Customer Service and asked about this. Within 24 hours I received a reply back stating the Nomad has a water resistance of 30 m (100 ft). Freestyle has since updated the Nomad product information to reflect the 30 m (100 ft) water resistance.

I was very anxious to check out the watch functions. I naturally left the directions in the stand and began playing with the buttons to see how easy it was to figure out how the watch worked. In short order I was able to find the button that scrolls through the 8 modes and the backlight button. But this is a sophisticated piece of gear and next I did read the directions and worked though the different features.


READING THE INSTRUCTIONS

The instructions clearly described the steps for each of the 8 watch functions. The four buttons were designated as S1, S2, S3 and S4 which made it easy to follow all the steps. It is also nice that any function or feature is reached by only pressing one button at a time. I have had other multi-function watches that relied upon 2 button combinations which were awkward and difficult to remember.

The instructions include a Water Resistance Guide which lists the properties for the different ratings. For the Nomad watch this rating is described as, "Suitable for washing hands and light splashing." I did notice there is a misprint in this guide table. The first category should read, "3 ATM / 30 METERS / 100 FT / 30 METERS H2O." However, as can be seen in the picture from this guide, in the first category it lists "50 METERS" where it should list "30 METERS."

Water Resistance Guide
Water Resistance Guide



Regarding the altimeter and barometer functions, while the instructions provided easy to follow directions to calibrate each of these functions, there was no description of the interrelationship of these functions. Nor was there any background information provided to help understand the appropriate way to calibrate these functions. A little more explanation in this area would help ensure the watch is being used with the best achievable accuracy, as well as understand the limitations of these functions.

TRYING IT OUT

While wearing the watch it felt comfortable on my wrist. It is not excessively heavy. The size of the watch body fits well on the back of my wrist. It is a bit larger than a basic wrist watch. But it is definitely smaller than many other multi-function outdoor watches on the market. The control buttons are easy to reach and are easily activated. The backlight is available in all 8 functions. It provides a bright enough light to make the display very visible. One press of the button and the watch stays illuminated for about 4 seconds.

Here's a rundown of my initial impression of the different displays and functions:

- Time and Date
Very readable display and was easy to change the time and date. I liked that this display also included a small graphic of barometric pressure trend. This function has the capability to be set for 2 different time zones.

- Compass
The numerical bearing display is very readable. It also has small tick marks to indicate N, S, E and W. These were a little more difficult to see. As I swung the watch around it quickly changed bearings with little or no lag time. This function has the capability to set the compass for the local declination.

- Altimeter
The main altitude display uses larger sized numerals for the hundreds and smaller numerals for the tens and ones places. This made it easy to quickly determine the altitude without the need for a comma in the display. It was also very easy to calibrate the altimeter, either by entering elevation or sea level pressure.

- Barometer
This display is very readable. In addition to displaying the current barometric pressure it also displays a pressure trend graphic. The barometer is easily calibrated with the sea level pressure. The barometric pressure can display in units of mbar or inHg.

- Chronometer
This function also has a large display. It has the ability to elapsed time, split times and laps.

- Timer
The timer uses the same readable display numerals. It has a count down and a count up capability, utilizing the beep and flashing display.

- Alarm
The alarm feature can be set to beep at a specific time, altitude or pressure.

- Temperature
This was a surprise feature. It was not mentioned on the product web site. This has a readable display and units may be set to degrees F or C. This function has the ability to adjust the temperature with an offset of +/- 10 deg F or +/- 5 deg C.

INITIAL REPORT SUMMARY - Oct. 29, 2008

I am very pleased with the Freestyle Nomad watch. It is built well and looks to be very rugged. I really like having all the 8 functions in a single wristwatch. The control buttons are easy to operate. The directions provided clear directions to operate the different watch functions.

The Nomad has a nice style and appearance to it. However, the size of the watch is such that it still looks like an outdoor, multi-function watch. Despite the description on the Freestyle website that it is a very "wearable" watch, it would not be something I would wear to the office. I do look forward to getting out in the field with this watch, though.

Nomad watch on my wrist
Nomad watch on my wrist


Here's what I like about the watch,
- comfortable fit
- 8 modes
- easy to operate control buttons

During testing I'll be paying close attention to:
- accuracy of all the functions
- ability to make adjustments and calibrations in the field
- durability

This concludes my Initial Report. The Field Report will be amended to this report in approximately two months. Please check back then for further information.



FIELD REPORT

FIELD LOCATIONS AND CONDITIONS

During this phase of testing I used the Nomad watch on two overnight trips and 3 day hikes. All these trips were in the central Cascade Mountains.

The first overnight started at 2,200 ft (670 m), camped at 5,000 ft (1,500 m) and the next day scrambled up a peak with a high point of 6,600 ft (2,000 m). Temperatures ranged from a high of 50 F (10 C) to a low of around 30 F (-1 C). It was overcast and windy the first day. The second day was perfectly calm and sunny.

The second overnight, I started around 1,500 ft (450 m) and camped at 4,000 ft (1,200 m). Then the next day hiked up to a high point of 6,400 ft (1,950 m). It was a mixed bag of broken clouds, mist, drizzle and rain for both days on this trip. The first day's temperatures ranged from 45 to 30 F (7 to -1 C). The next day temperatures remained right around 30 F (-1 C).

One of the day hikes I started out at 1,800 ft and had an elevation gain of 3,900 ft (1,200 m). Temperatures were around 50 F (10 C) at the start under partly sunny skies. At the high point it had begun to cloud up and temperatures were around 40 F (7 C). There was just a slight breeze all day. I started out on bare trail and hiked up into several feet of snow and although I had snowshoes with me, didn't yet need them as the snow was well packed down from other hikers who had been up the day before.

Right before Christmas I went out on a day trip. I was able to hike the packed snow in boots for the first 1/2 hour then the snow became deep and soft enough to warrant snowshoes. That day it was clear and calm at the start with temperatures around 10 F (-12 C) at an elevation of around 1,500 ft (450 m). As I gained an elevation of around 4,500 ft (1,400 m) temperatures had dropped to 5 F (-15 C). It later became windy on the way down and temperatures stayed steady at 5 F (-15 C).

My last day trip was at a time of high avalanche hazard in the Cascades. So on that day I did a loop trail which started out at around 500 ft (150 m) and had an elevation gain of just less than 1,000 ft (300 m). Temperatures were around 35 to 40 F (2 to 4 C). It was a cloudy day with rain off and on such that the trail became a wet slushy mess. But better that than to risk avalanche hazard terrain at higher elevations.

PERFORMANCE IN THE FIELD

I've been very pleased with the performance of the Nomad watch. While the Nomad is larger than my regular field watch, it remained comfortable to wear, even during long days on the trail. The watch face is easy to read. The backlight provides sufficient brightness to read the watch at night. The buttons of the watch are very easy to manipulate, even when wearing gloves. The watch crystal did not scratch, however I did get a few scratches in the finish of the metal body of the watch. This clued me in to the fact the watch body is not brushed stainless steel as I originally thought and noted in my Initial Report. Rather the watch body is metal and coated with a baked enamel finish.

Scratches in watch body finish
Scratches in watch body finish



As I used the watch I quickly became familiar with the different functions and features. While I brought along the watch's instructions on my first few trips, I learned the functions well enough such that I leave the instructions home now.

Here's my comments on the watches modes:

Time - I encountered no problems and the watch kept accurate time.

Compass - I am still getting used to this feature. The compass heading readout is affected by how level you hold the watch. Unlike a floating needle of a traditional compass, with the electronic compass feature I didn't really have a good feedback mechanism to let me know the watch is truly level and that I was getting an accurate reading. I found the best way to accomplish this was to swing the watch left and right to home in on the correct heading. This worked OK, but I didn't feel it was as precise as I can get with a traditional compass. So I've got work on this a bit and get a better feel for leveling the watch when getting a compass bearing.

Right out of the box the compass was off by about 30 degrees so I put it through the calibration steps. However the instructions call for the user to rotate the watch to "freeze the last moving blinking dot to stay at 12-hour position." Despite rotating the watch this never really happened. But by going through the calibration mode, the watch did accurately display the correct headings when compared to my traditional hand held magnetic compass.

Altimeter - I used the watch in this mode the most. I really liked the large numeral display of the hundred and thousands units. I also liked that the watch displayed time while in Altitude mode. On nearly all my outings I had significant elevation gain, usually several thousand feet (hundreds of meters). I found the Nomad elevation to generally be within 100 ft (30 m) when compared with the map, my GPS, or in comparing the elevation reading at the trailhead at the start and then conclusion of the trip. I found the watch very easy to calibrate, either with sea level pressure or with elevation. I generally used elevation for calibration purposes.

During testing as I worked more with the watch I began to wonder how the sea level pressure, watch barometric pressure and watch altitude all inter-relate. I was under the impression that once the watch was calibrated with sea level pressure or elevation, the resulting sea level pressure would remain fixed as the baseline for the pressure sensor to use to determine elevation. But I observed changes in the sea level pressure, even when I had not recalibrated the watch. This had me a bit confused so I emailed Freestyle Customer Service. Less than 48 hrs later I received a reply that the watch's software is designed to distinguish changes in atmospheric pressure from changes in altitude, hence the automatic sea level pressure change. I don't quite know how this is possible since the watch only works off a single atmospheric pressure sensor and none of this is explained in the product instructions. I began paying closer attention to the automatic changes in sea level pressure and have found they do compare somewhat to changes in atmospheric pressure. Initially I made these comparisons with the local NOAA weather station while at home. I have also noted the relationships between the sea level pressure, watch barometric pressure and elevation at the trailhead at the start of a trip, and comparing these same parameters at the end of the trip. While the watch's ability to detect changes in atmospheric pressure are not exact (+/- 0.02 mbar), they have been close enough to keep the elevation reading within 100 ft (30 m). So I have been quite impressed with this feature. It appears to work well enough to keep the elevation reading accurate between calibrations at known points when the atmospheric pressure is changing.

Barometer - This functioned very well. I really liked the trend graph since it provided a quick and easy means of gauging the barometric pressure change. I compared the watch's barometer reading with a nearby NOAA weather station data available via the NOAA web site. I always had very good agreement. The trend was always correct and quantitatively the agreement was within 0.02 mbar.

Chronograph - While this is not a feature I would normally use, I played around with this and it worked properly.

Timer - This is a simple feature and it worked properly.

Alarm - The alarm can be set to got off at a specific elevation, barometric pressure or time. I used the time alarm during this phase of testing and it worked fine. The alarm is loud enough to wake me if I am not wearing the watch and have it next to my head. But as might be expected, when wearing the watch with my arms down in my sleeping bag, it is not really audible.

Temperature - The watch does accurately display temperature, however the temperature sensor is integral to the watch body. As would be expected, when wearing the watch it displays the temperature of the watch against the skin of the wearer which is not very useful. When wearing the watch during field testing, either with or without gloves on, it typically displayed a temperature ranging from 65 to 75 F (18 to 24 C). On my snowshoe trip, even when temperatures dipped down to 5 F (-15 C), with the watch covered by the cuff of my thick glove it displayed a temperature of 65 F (18 C).

Wearing the watch atop Mt Dickerman
Wearing the watch atop Mt Dickerman - 5,723 ft (1,744 m)

FIELD REPORT SUMMARY - January 6, 2009

Overall I have been very pleased with the Freestyle Nomad watch. It is comfortable to wear and the display is easy to read. While I like having all the different modes, I used the Altitude the most. In the Altitude mode the watch is easy to calibrate and provides accurate information. I'm particularly impressed that the watch has the ability, albeit limited, to automatically detect and adjust to changes in atmospheric pressure.

Likes:
- comfortable to wear
- accurate elevation
- easy to operate

Dislikes:
- instructions don't really cover the use of the Altimeter mode
- the temperature mode is not very useful since it really just provides a reading of the temperature of the skin of the wearer's wrist

This concludes my Field Report. Check back in 2 months for my Long Term Report


LONG-TERM REPORT

LONG-TERM TEST LOCATIONS AND CONDITIONS

During this phase of testing I wore the Freestyle Nomad watch on two winter day hikes, a cross country ski day trip, a four day backcountry ski trip to a hut system in the vicinity of Mt Rainier and an overnight climbing trip to a peak in the Olympic Mountains. Temperatures during these trips ranged from 15 to 40 F (-9 to 4 C). Weather I encountered was a mixed bag of rain, freezing rain and sunshine. Daily elevation gain or loss ranged from 1,500 to 3,900 ft (450 to 1,200 m) with a high point of 5,944 ft (1,812 m) encountered on top of Mt. Ellinor in the Olympics.

PERFORMANCE IN THE FIELD

I remain very pleased with the Nomad watch and it has held up well during testing. The face has remained clear and there are no scratches on it. The watch body only has those few scratches in the finish noted in the Field Report. The watch band and buckle show virtually now sign of wear and tear. The yellow hard rubber border around the watch face has gotten a little dingy. This may be in part due to its rubbing against the cuff of my dark blue rain shell. But even though it is a little dingy, I like the yellow border because it makes the watch easier to see if I have taken it off and laid it down in the tent.

I have used all the functions of the watch and there are a few that I used most often. Here's a rundown:

Time and Date - this feature has remained very accurate. When we shifted to daylight savings time last week I was able to change the clock even without the instructions because the features are so easy to use.

Compass - I continue to struggle with getting the hang of using this electronic compass. Even after a lot of practice I still have difficulty determining if the watch is truly level and that I am getting an accurate reading. I comparisons with my magnetic compass, the Nomad compass was accurate. But it took a lot of swinging and tilting of the watch until I felt confident my reading was true. So this feature is accurate enough for general navigation and to help me find my way back to the trailhead should I become lost. But I would not rely on it for very detailed route finding or taking bearings to identify peaks.

Wearing the Nomad atop Mt Ellinor
Wearing the Nomad atop Mt Ellinor - 5,944 ft (1,812 m)


Altimeter - This is my favorite function and one I used the most. Once properly calibrated, this function was nearly always accurate within 100 ft (30 m). This was particularly impressive on the overnight climbing trip when I gained and lost 3,900 ft (1,200 m) over the course of the weekend and had only calibrated the altimeter once, at the start of the trip. I would see this type of accuracy even when barometric pressure had changed during the day. I am still a bit perplexed how the watch can adjust the sea level pressure to compensate for changes in barometric pressure during the course of the day when the watch has not been re-calibrated. There was one instance when a significant drop in barometric pressure resulted in an elevation error of around 200 ft (60 m), but this was an exception.

Barometer - Having a barometer with me while camping is great. It has really been nice to know how fast the pressure is rising or falling to anticipate changes in the weather. As noted in my Field Report, I particularly liked the graphic that shows the pressure trend for the previous 24 hours.

Chronometer - This feature worked fine when checking it out during this phase of testing. But a lap counter/timer is not something I would use while backpacking. For down hill skiers I could see this being a fun feature, using it to time and track runs.

Timer - I used the timer when cooking meals and it worked just fine. The audible alarm is not very loud, though. When winter camping, the watch would be covered by my jacket sleeve which muted the alarm to the point that I really had to listen for it to hear it go off. This will be less of an issue when camping this summer.

Alarm - This function also worked well. But as noted in my Field Report, the audible alarm can be difficult to hear. If I took the watch off and lay it next to my head the alarm was loud enough to wake me up.

Temperature - As noted in my Field Report, the temperature displays the temperature of the wrist of the wearer. I did try using the watch attached to a clip on the shoulder strap of my pack. With this arrangement I would get an accurate reading of the outside temperature compared to small mercury thermometer I bring on most trips. But for ease of use I prefer to wear the watch on my wrist.

Clipped to my shoulder strap
Clipped to my shoulder strap

LONG TERM REPORT SUMMARY - Mar. 11, 2009

In summary I am very impressed with the Freestyle Nomad watch. It has proven to be a very durable watch and all functions continue to work flawlessly as the test comes to a close. The display is well laid out and the functions and features are easy to operate with the 4 buttons on the watch.

It is nice to have such features as a compass, barometer, timer, alarm and thermometer all in unit. These features aside, most of all I have been pleased with the altimeter. I've been impressed at how accurate it remains without re-calibration even after a long day and significant change in elevation. I am looking forward to having this watch with me when the climbing season starts up this spring.

For the reasons above, the Freestyle Nomad watch has earned a spot as a standard piece of my outdoor gear. I plan to continue to use this watch on all my future backpacking, climbing and day trips.

At the end of Long Term Testing my "Likes" remain unchanged:
- comfortable to wear
- accurate elevation
- easy to operate

My 2 "Dislikes" remain :
- instructions don't really cover the use of the Altimeter mode
- the temperature mode is not very useful since it really just provides a reading of the temperature of the skin of the wearer's wrist

with one more added to the list,
- audible alarm for timer and alarm is not very loud and easily muted if covered

My thanks to BackpackGearTest.org and Freestyle for the opportunity to test the Nomad watch.

This report was created with the BackpackGearTest.org Report Writer Version 1. Copyright 2009. All rights reserved.

Read more reviews of Freestyle gear
Read more gear reviews by Tom Callahan

Reviews > Electronic Devices > Watches > Freestyle Nomad Watch > Test Report by Tom Callahan



Product tested and reviewed in each Formal Test Report has been provided free of charge by the manufacturer to BackpackGearTest.org. Upon completion of the Test Series the writer is permitted to keep the product. Owner Reviews are based on product owned by the reviewer personally unless otherwise noted.



All material on this site is the exclusive property of BackpackGearTest.org.
BackpackGearTest software copyright David Anderson